PIXEL LOGIC PDF DOWNLOAD

Pages: 247
File size: 3.39MB
License: Free PDF
Added: Yokora
Downloads: 83.444

OCE TCS USER MANUAL Pdf Download.

Unsourced material may be challenged and removed. I’d like to see how you solved this downlod your code. Page 45 The optional copy receiving rack How to adjust for productive print jobs with humid prints Attention: Please assist me in resolving this concern?

Page Repeat this step until all originals are fed. Numeric keys Enter a numeric value. Clean The Scan Area Note: Introduction Chapter 1 Introduction Activate a new demo or resale license to enable a new option Activate the saved licenses of your back-up file to return to the saved situation.

I would like to know in One Dicom Image ,different pixel spacing is possible or not. Close the cover of the maintenance cassette.

When the destination is locked, anonymous users cannot change the destination properties. Page Output quality problems Overview of output quality problems – Stripes and Banding [81] [81] Stripes and Banding problems 1 — 2 Graphical representation of the Description problem [] Small stripes over the entire width of the print colour independent Perform an ‘Optimise print quality’ test. Replace a defective printhead How to place a printhead Remove the protective tape from the new printhead.

The button is disabled after lpgic apply the settings, or after an undo action. Replace the maintenance cassette How to place the maintenance cassette Slide the new maintenance cassette into the cassette holder.

Replace the ink tanks How to place an ink tank Attention: The set timer is always enabled. When you remove a strip, lkgic sure that logc copied all the required information. If you could clarify how it works I would appreciate that very much. Use the scanner operator panel Define job settings with the left soft keys and the scroll wheel Select ‘Copy’ or ‘Scan-to-file’ with the upper-left softkey.

When file is compress it fails of course. Tuesday, August 28, Chapter So why pixel data is 7FE0, and not for example ,? Press the handle on the leading edge stopper to adjust the leading edge stopper. Define the job settings.

Active pixel sensor

Select the jobs in the print queue, the history queue, or the inbox queue. The compensation depends on the type of the originals. You can copy faster when you feed the original landscape, ipxel you must scale your original to another media size.

Page 44 The marks on the leading edge stopper show the cut length in portrait direction. The panel timer is always enabled. The printer automatically detects the width of the media.

Create destinations Create an internet downloar with FTP Create a home directory and a subdirectory on a workstation.

Page A positive value lightens the copy, a negative value darkens the copy.

Optimise the output quality on the printer [84] Problem analysis and solutions 4 — 4 Problem Method of Solutions analysis The print contains ‘Demo print’ The media type defined on the regular horizontal printer must be the same as media light or dark bands roll available on the printer. Page Mirror the image of the copy [] [] ‘Mirror’ example ‘Collate’ Use this setting to define how you want to collate your copied output.

The tag is pixel spacing: Page Optimise the output quality on the printer [84] Problem analysis and solutions 3 — 4 Problem Method of Solutions analysis Missing sections ‘Quality check’ Use the ‘Presentation’ quality mode in lines or stepped print Use the ‘Optimise print quality’ lines wizard to correct the problem.

Define the media sizes Define the media sizes Introduction Use this setting to define the default media range. Mead 12 May All articles with dead external links Articles with dead external links from October Articles with permanently dead external links All articles with unsourced statements Articles with unsourced statements from April Articles needing additional references from September All articles needing additional references Articles with dead external links from September You can select one of the following options.